ICub instructions/Archive: Difference between revisions
(→Old Innovation Days 2009 archive: archive more stuff here) |
m (new March 2011 (prior to 11 March) archive section) |
||
Line 6: | Line 6: | ||
Example: '''cameras.sh icon''' (to be placed in <code>~/Desktop/</code>) contains: | Example: '''cameras.sh icon''' (to be placed in <code>~/Desktop/</code>) contains: | ||
=== 2011 version === | |||
#!/bin/bash | |||
source ~/.bash_env | |||
cd $ICUB_ROOT/app/$ICUB_ROBOTNAME/scripts | |||
manager.py cameras_320x240_setForTracking.xml | |||
=== 2010 version === | |||
#!/bin/bash | #!/bin/bash | ||
Line 56: | Line 65: | ||
set all ta1 // mouth talking position 1 (mouth closed) | set all ta1 // mouth talking position 1 (mouth closed) | ||
set all ta2 // mouth talking position 2 (mouth open) | set all ta2 // mouth talking position 2 (mouth open) | ||
= Old March 2011 archive = | |||
= Old Innovation Days 2009 archive = | = Old Innovation Days 2009 archive = |
Revision as of 21:14, 12 March 2011
Note: these methods are obsolete and kept here for historic reference only. Most probably, you may ignore this page and go back to iCub demos.
Useful things to archive
Desktop icons to launch the Application Manager and XMLs
Example: cameras.sh icon (to be placed in ~/Desktop/
) contains:
2011 version
#!/bin/bash source ~/.bash_env cd $ICUB_ROOT/app/$ICUB_ROBOTNAME/scripts manager.py cameras_320x240_setForTracking.xml
2010 version
#!/bin/bash source ~/.bash_env cd $ICUB_ROOT/app/default/scripts ./manager.py cameras_320x240.xml
Note that Resource Finder searches for XMLs in $ICUB_ROOT/app/$ICUB_ROBOTNAME/scripts/
first, then in a number of other directories.
Starting YARP components
In case that (i.e., cluster_manager.sh) did not work, you can launch the program in a terminal:
cd $ICUB_ROOT/app/default/scripts ./icub-cluster.py $ICUB_ROOT/app/$ICUB_ROBOTNAME/scripts/vislab-cluster.xml
Other components
Cameras
In case that (i.e., cameras.sh) did not work, type this inside a chico3 console:
cd $ICUB_ROOT/app/default/scripts ./manager.py cameras_320x240.xml
That XML file is actually located in $ICUB_ROOT/app/$ICUB_ROBOTNAME/scripts/. Resource Finder gives priority to that directory, when $ICUB_ROBOTNAME is defined, as is the case for us (iCubLisboa01).
Alternatively, the second command can use the cameras_640x480.xml
configuration, if you need a larger resolution.
Face expression driver
Open a pc104 console and type:
cd $ICUB_ROOT/app/faceExpressions/scripts ./emotions.sh $ICUB_ROOT/app/iCubLisboa01/conf
Facial expression demo
Run one of these two commands on any machine:
$ICUB_DIR/app/faceExpressions/scripts/cycle.sh
or
yarp rpc /icub/face/emotions/in set all hap // full face happy set all sad // full face sad set all ang // full face angry set all neu // full face neutral set mou sur // mouth surprised set eli evi // eyelids evil set leb shy // left eyebrow shy set reb cun // right eyebrow cunning set all ta1 // mouth talking position 1 (mouth closed) set all ta2 // mouth talking position 2 (mouth open)
Old March 2011 archive
Old Innovation Days 2009 archive
Other components
Cameras
Open a chico3 console and type:
cd $ICUB_ROOT/app/default/scripts ./cameras start
Sometimes we need to manually establish these connections in order for images to display:
yarp connect /icub/cam/right /icub/view/right yarp connect /icub/cam/left /icub/view/left
To turn off the cameras:
./cameras stop
To change the size of images:
nano -w $ICUB_ROOT/app/$ICUB_ROBOTNAME/scripts/config.sh // TODO: check if we are really using $ICUB_ROBOTNAME and not default
Ball tracking and reaching demo, old method
- Run image rectifier on icubbrain2
cd 13.FIL ./0.LEFT_320x240_image_rectifier.sh
- Set left camera colour parameters and run tracker
cd 13.FIL ./1.LEFT320x240.iCub_set_parameters_of_framegrabber_REALISTIC.sh ./2.execute_the_tracker.sh
- Start a viewer on chico3
yarpview /viewer
- Start the facial expression driver on the pc104:
cd $ICUB_DIR/app/faceExpressions/scripts ./emotions.sh $ICUB_DIR/app/iCubLisboa01/conf
- Run expression decision module
cd 13.FIL ./3.execute_trackerExpressions.sh
- Run coordinate transformation module
cd 13.FIL ./5.execute_LeftEyeToRoot.sh
- Run arm inverse kinematics module (this must run on icubbrain2)
iKinArmCtrl --onlyXYZ
- Connect all ports. Careful: the robot will start moving after this step!
cd 13.FIL ./4.LEFT.iCub_connect_ports.sh ./6.connect_LeftEyeToRoot.sh
- [OPTIONAL, FOR DEBUG] Read the 3D position of the ball in the root reference frame (from any machine)
yarp read ... /icub/LeftEyeToRoot/ballPositionOut
Ball tracking and reaching demo, not so old method
This demo uses the left eye and the right arm of Chico. Assumption: left eye is running at a resolution of 320x240 pixels. Attention: make sure that the launcher uses icubbrain2 (32bit) or any of the 32-bit Cortexes for the kinematics computation.
These dependencies will be checked by the GUI:
- cameras are running
- iCubInterface is running
You need to set the color parameters of the camera using the framegrabberGui (left eye) to the following. Be careful, though, that the first time that you move any slider the action typically does not work. You have to move the slider first to a random position and then to the desired one.
brightness 0 sharpness 0.5 white balance red 0.474 white balance blue 0.648 hue 0.482 saturation 0.826 gamma 0.400 shutter 0.592 gain 0.305
On chico3 type:
cd $ICUB_ROOT/app/default/scripts ./manager.py $ICUB_ROOT/app/demoReach_IIT_ISR/scripts/isr/demoReach_IIT_ISR_RightHand.xml
Notes:
- the aforementioned XML file configures a system that moves the head and right arm of the robot. There exist also an XML file for moving juste the head and the left hand (
demoReach_IIT_ISR_LeftHand.xml
), one which moves just the head (demoReach_IIT_ISR_NoHand.xml
) and one which only starts the tracker, so it moves nothing (demoReach_IIT_ISR_JustTracker.xml
). - you still need to set the camera parameters using framegrabberGui, we're trying to make that automatic.
Pausing the Ball Following demo
You can do this by disconnecting two ports (and connecting them again when you want to resume the demo).
Note that this will only stop the positions from being sent to the inverse kinematics module (and thus, almost always, it will stop the robot). The rest of the processes (e.g., the tracker) will keep running.
- Pause (from any machine)
yarp disconnect /icub/LeftEyeToRoot/ballPositionOut /iKinArmCtrl/right_arm/xd:i
- Resume (from any machine)
yarp connect /icub/LeftEyeToRoot/ballPositionOut /iKinArmCtrl/right_arm/xd:i
Quitting the Ball Following demo
- Disconnect all ports. Careful: this will stop the robot.
cd 13.FIL ./7.disconnect_all.sh
- Quit/Kill the processes of the demo, in any order.
SIFT Object Detection and Tracking demo
Ignore this for now, as some libraries are not compiling. [controlGaze2 COMPILATION TO BE FIXED ON THE SERVERS - PROBLEMS WITH EGOSPHERELIB_LIBRARIES and PREDICTORS_LIBRARIES]
Assumptions:
- cameras are running
- iCubInterface is running at /icub/head (in order to read encoder values)
On any machine, run:
$ICUB_ROOT/app/$ICUB_ROBOTNAME/scripts/controlGazeManual.sh $ICUB_ROOT/app/$ICUB_ROBOTNAME/scripts/attentionObjects/noEgoSetup/CalibBothStart.sh
On any machine (preferably one of the icubbrains, at this task is computationally heavy) type:
$ICUB_DIR/app/$ICUB_ROBOTNAME/scripts/attentionObjects/noEgoSetup/startSiftObjectRepresentation.sh
If you want to change the configuration, do:
nano -w $ICUB_DIR/app/$ICUB_ROBOTNAME/conf/icubEyes.ini
Attention system demo
Assumptions:
- /icub/cam/right is running at 320x240 pixels
- iCubInterface is running at /icub/head
Please note: we will run all the modules of this demo on icubbrain1 (64bit), unless specified differently.
Start the following module:
cd $ICUB_ROOT/app/attentionDistributed/scripts ./camCalibRightManual.sh
Then:
cd $ICUB_ROOT/app/attentionDistributed/scripts/ ./salienceRightManual.sh
Then:
cd $ICUB_ROOT/app/attentionDistributed/scripts ./egoSphereManual.sh
Then:
cd $ICUB_ROOT/app/attentionDistributed/scripts ./attentionSelectionManual.sh
Then:
cd $ICUB_ROOT/app/attentionDistributed/scripts/ ./controlGazeManual.sh
And finally, but this time on chico3:
cd $ICUB_ROOT/app/attentionDistributed/scripts ./appGui.sh
Press 'check all ports and connections', followed by pressing '>>' buttons (becoming green), in all the tabs of the GUI.
Now, in the 'Salience Right' tab of the GUI, press 'Initialize interface' and move the thresholds a bit (e.g., the 'intensity' one).