Instructions: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
m (→Robot Usage) |
||
| Line 21: | Line 21: | ||
* Plug the ethernet cable to your PC | * Plug the ethernet cable to your PC | ||
* The robot has a fixed IP: 192.168.1.2 | * The robot has a fixed IP: 192.168.1.2 | ||
* Connect via ssh. Username: maiss | * Connect via ssh. Username: maiss | Password: sistemasautonomos | ||
* A roslaunch is provided and launches both the sick and the robot drivers | * A roslaunch is provided and launches both the sick and the robot drivers | ||
** roslaunch maiss_nav robot.launch | ** roslaunch maiss_nav robot.launch | ||
Revision as of 11:44, 21 October 2014
About
This page presents practical instructions for the Pioneer P3-AT. The use of this robot requires an external laptop for running the main software.
Hardware
The autonomy of this robots is not very large. If the robot is not physically running (making changes in code, debug, etc etc) keep it plugged to the provided power adapter.
A red emergency button in placed on top of the robot. Check if it is not pressed when you want the robot to move.
Software
Both the robot and SICK drivers are already installed on the robot.
Robot Usage
- Turn the robot on in the back part
- Check if the Sick Laser in on ( LEDs on the top)
- Plug the ethernet cable to your PC
- The robot has a fixed IP: 192.168.1.2
- Connect via ssh. Username: maiss | Password: sistemasautonomos
- A roslaunch is provided and launches both the sick and the robot drivers
- roslaunch maiss_nav robot.launch