Chico2 desktop machine configuration

Ubuntu 8.04

Hard disk partitioning

size	mountpoint	filesystem
498GB	/	ext3
2GB		swap

machine name: chico2 user name: vislab

operations performed after the standard installation

• system update
• enabled nvidia drivers
• removed the package network-manager-gnome.
• manually configured the internet connection (/etc/network/interfaces):

  auto lo
  iface lo inet loopback
  
  auto eth1
  iface eth1 inet static
  address 10.10.1.52
  netmask 255.255.255.0
  network 10.10.1.0
  broadcast 10.10.1.255
  gateway 10.10.1.254

• install some required packages:

  sudo apt-get install libncurses5-dev libace-dev cmake libgsl0-dev libgtk2.0-dev libgtkmm-2.4-dev libglademm-2.4-dev cvs g++ subversion ssh

• install YARP

  mkdir ~/YARP
  cd ~/YARP
  cvs -d:pserver:anonymous@yarp0.cvs.sourceforge.net:/cvsroot/yarp0 login
  cvs -z3 -d:pserver:anonymous@yarp0.cvs.sourceforge.net:/cvsroot/yarp0 co -P yarp2
  cd yarp2
  cmake .    (or ccmake .)
  make
  make test

add these lines to /etc/bash.bashrc:

  PATH=$PATH:/home/vislab/YARP/yarp2/bin/
  YARP_DIR=/home/vislab/YARP/yarp2/
  YARP_ROOT=/home/vislab/YARP/yarp2/

• install OpenCV (Ubuntu prepackaged version 1.0.0-4)

  sudo apt-get install libcv1 libcvaux1 libcvaux-dev libcv-dev libhighgui1 libhighgui-dev opencv-doc python-opencv 

• install the iCub software:

  in /usr/local/src: 
  sudo cvs -d vislab@cvs.robotcub.org:/cvsroot/robotcub co iCub

add these lines to /etc/bash.bashrc:

  ICUB_DIR=/home/vislab/iCub/
  ICUB_ROOT=/home/vislab/iCub/

• set up passwordless log-in to the Cortex computers:

  #generate the public and private keys on this computer. enter empty strings when prompted for various answers.
  ssh-keygen   
  #the cortex computers (ip addresses 10.10.1.1 to 10.10.1.5) share the same disk, so you need to do the set up only once.

  #copy the public key you just generated to cortex1, on the user account you want to use there (e.g. demo).
  scp /home/vislab/.ssh/id_rsa.pub demo@10.10.1.1:   
  #log in to cortex1
  ssh demo@10.10.1.1
  #add the public key to the authorized ones
  cat id_rsa.pub  >> ~/.ssh/authorized_keys   
  #remove the id_rsa.pub file and log out from cortex1.
  rm id_rsa.pub
  exit
  exit
  #log in again to each cortex computer, to check that the process worked and they don't prompt for a password.

• set up passwordless log-in to pc104

pc104 boots from a read-only medium, so you cannot modify permanently its authorized_keys file. pc104, though, mounts a part of icubsrv's hard-disk and then runs some scripts from there (see the pc104 page for reference).

  #copy the usual public key to the icubsrv (laptop)
  scp id_rsa.pub icub@10.10.1.51:
  #ssh to icubsrv
  ssh icub@10.10.1.51
  #add the key to the authorized ones
  cat id_rsa.pub /exports/code-pc104/pc104/hooks/keys/authorized_keys
  #rm the id_rsa.pub file
  rm id_rsa.pub
  #restart pc104 and check that you can log in passwordlessly.

• add a second panel/bar at the top of the screen:

  right click on the normal bar and select "new panel".

• add buttons to the panel, to open terminals and file managers on remote machines.

  pick the images you like and turn them into 48x48pixel gif images (you can use the GIMP for this).
  
  example for the button to open the gnome-terminal on cortex1:
  right click on the panel and select "add to panel"
  select "custom application launcher"
  click on the icon and select the directory where your icons are, typically ~/Pictures/
  click on open, then select the picture for this particular button
  write in the field "command": gnome-terminal --window-with-profile=cortex -e "ssh demo@10.10.1.1 -X"
  set the name to something like: ssh demo@cortex1

  the profile specified (--window-with-profile=cortex) does not exist by default, you need to create it.
  those profiles are used to give terminals on different machines different colors (e.g. all terminals running in a cortex computer will be blue, terminals local to chico2 will be white, etc.).
  to create the "cortex" profile:
  open a terminal on, say, cortex1
  click on File, select "new profile" and name it "cortex", without

• edit file $ICUB_ROOT/app/default/scripts/config-nodes.sh like this:

  NODE_CAMERAS=pc104
  NODE_VIEWERS=chico2