Robotics lab resources: Difference between revisions
Jump to navigation
Jump to search
(New page: This page contains information regarding the undergrad course Robotics at [http://www.ist.utl.pt Instituto Superior Técnico]. This is NOT the course official page (which can be found [htt...) |
|||
| Line 5: | Line 5: | ||
=== Interface with MATLAB === | === Interface with MATLAB === | ||
The latest version of the software (developed in house) can be found here: | The latest version of the software (developed in house) can be found here: [Media:Matlab rob3 tr5.zip] | ||
==== Application interface ==== | |||
; sp=serial_port_start(): initializes the serial port, returning an object referencing it (''sp'') | |||
; rob3_inir(sp): initializes the arm, returning a (meaningless) integer | |||
; rob3_move_joint(sp,n,x): moves joint ''n'' to angular position ''x'' | |||
; rob3_move_joints(sp,v): moves all 6 joints to the positions defined by the vector ''v'' (1x6) | |||
; rob3_read_joint(sp,n): reads the angular position of joint ''n'', returning a vector [64+joint-1, position, 3] | |||
; rob3_read_joints(sp): reads the angular position of all joints, returning a vector [71, position_1, ..., position_6, 3] | |||
=== Hardware repair === | === Hardware repair === | ||
Revision as of 07:53, 9 April 2008
This page contains information regarding the undergrad course Robotics at Instituto Superior Técnico. This is NOT the course official page (which can be found here looking up for Robótica).
ROB3/TR5 robotic arm
Interface with MATLAB
The latest version of the software (developed in house) can be found here: [Media:Matlab rob3 tr5.zip]
Application interface
- sp=serial_port_start()
- initializes the serial port, returning an object referencing it (sp)
- rob3_inir(sp)
- initializes the arm, returning a (meaningless) integer
- rob3_move_joint(sp,n,x)
- moves joint n to angular position x
- rob3_move_joints(sp,v)
- moves all 6 joints to the positions defined by the vector v (1x6)
- rob3_read_joint(sp,n)
- reads the angular position of joint n, returning a vector [64+joint-1, position, 3]
- rob3_read_joints(sp)
- reads the angular position of all joints, returning a vector [71, position_1, ..., position_6, 3]