BallFollowingDemo: Difference between revisions
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
== Preliminaries == | |||
This demo uses the LEFT EYE and RIGHT ARM of the iCub, plus TWO CORTEX COMPUTERS. | This demo uses the LEFT EYE and RIGHT ARM of the iCub, plus TWO CORTEX COMPUTERS. | ||
It needs the left eye to run at a resolution of 320x240. | It needs the left eye to run at a resolution of 320x240. | ||
Line 5: | Line 7: | ||
We will use Cortex1 and Cortex2 in the wiki. | We will use Cortex1 and Cortex2 in the wiki. | ||
The CPU's of Cortex2 will be fully loaded running the tracker, while those of Cortex1 will have a ~60% load. | The CPU's of Cortex2 will be fully loaded running the tracker, while those of Cortex1 will have a ~60% load. | ||
If you need to stop the robot at any time, just press the red button. | |||
== Running the demo == | |||
0 - Turn on the iCub: cameras, iCubInterface, etc. | 0 - Turn on the iCub: cameras, iCubInterface, etc. | ||
Line 45: | Line 51: | ||
./5.connect_LeftEyeToRoot.sh | ./5.connect_LeftEyeToRoot.sh | ||
7 - OPTIONAL - Read the 3D position of the ball in the root reference frame | |||
as anybody@anywhere | as anybody@anywhere | ||
yarp read ... /LeftEyeToRoot/ballPositionOut | yarp read ... /LeftEyeToRoot/ballPositionOut | ||
== Quitting the demo == | |||
0 - Disconnecting everything. THIS WILL STOP THE ROBOT. | |||
as demo@cortex?: | |||
cd 0.icub_3D_ball_tracker | |||
./6.disconnect_all.sh | |||
1 - Killing all the processes of the demo | |||
you can quit the various processes of this demo in any order. |
Revision as of 16:36, 31 March 2009
Preliminaries
This demo uses the LEFT EYE and RIGHT ARM of the iCub, plus TWO CORTEX COMPUTERS. It needs the left eye to run at a resolution of 320x240.
You need to use two Cortex computers for this demo. We will use Cortex1 and Cortex2 in the wiki. The CPU's of Cortex2 will be fully loaded running the tracker, while those of Cortex1 will have a ~60% load.
If you need to stop the robot at any time, just press the red button.
Running the demo
0 - Turn on the iCub: cameras, iCubInterface, etc.
1 - Run the image rectifier.
as demo@cortex1: cd 0.icub_3D_ball_tracker ./0.LEFT_320x240_image_rectifier.sh
2 - Set the color parameters of the left camera and run the tracker.
as demo@cortex2: cd 0.icub_3D_ball_tracker ./1.LEFT320x240.iCub_set_parameters_of_framegrabber_REALISTIC.sh ./2.execute_the_tracker.sh
3 - Run a viewer. When the likelihood is high, the contour is red, otherwise it's green.
on the computer you're using for visualization (e.g. chico2): yarpview /viewer
4 - Run the module that converts coordinates between reference frames (left eye to root).
as demo@cortex1: cd 0.icub_3D_ball_tracker ./4.execute_LeftEyeToRoot.sh
5 - Run the module that computes the inverse kinematics for the arm.
as demo@cortex1: cd iCub/bin ./iKinArmCtrl --onlyXYZ
6 - Connect all ports. CAREFUL: the robot should start moving after this step.
as demo@cortex1: cd 0.icub_3D_ball_tracker ./3.LEFT.iCub_connect_ports.sh ./5.connect_LeftEyeToRoot.sh
7 - OPTIONAL - Read the 3D position of the ball in the root reference frame
as anybody@anywhere yarp read ... /LeftEyeToRoot/ballPositionOut
Quitting the demo
0 - Disconnecting everything. THIS WILL STOP THE ROBOT.
as demo@cortex?: cd 0.icub_3D_ball_tracker ./6.disconnect_all.sh
1 - Killing all the processes of the demo
you can quit the various processes of this demo in any order.