Chico3

We installed Ubuntu 8.04 LTS Desktop ('Hardy Heron') 64 bit on the Tsunami laptop, dubbed chico3. For systems specifics click here.

Operating system installation

We chose to go for Ubuntu 8.04 because it is proven to be stable and working well with the latest versions of ACE, YARP and OpenCV (as of May 2009).

Partitions

We chose the 'Guided - use entire disk' option.

Hard disk partitioning

size	mountpoint	filesystem
287GB	/	ext3
8GB		swap

Ubuntu installation parameters

• machine name: chico3
• user name: icub

Operations after first boot

Operations performed after the standard installation:

• choose Main server (rather than Portugal server, which is incomplete) as the software repository. You can do this in System -> Administration -> Synaptic Package Manager -> Settings -> Repositories -> Download from: Main server
• system update
• enabled nvidia proprietary drivers (necessary to obtain a decent screen resolution)
• removed the package network-manager-gnome

Other operations performed

Network

• manually configured the internet connection (/etc/network/interfaces):

  auto lo
  iface lo inet loopback
  
  auto eth0
  iface eth0 inet static
  address 10.10.1.53 <-- this used to be venus' IP; not anymore
  netmask 255.255.255.0
  network 10.10.1.0
  broadcast 10.10.1.255
  gateway 10.10.1.254

• added the following lines to /etc/hosts, to enable running commands like: ping cortex1.

  10.10.1.50	pc104
  10.10.1.51	icubsrv
  10.10.1.52	chico2
  10.10.1.53	chico3
  10.10.1.1	cortex1
  10.10.1.2	cortex2
  10.10.1.3	cortex3
  10.10.1.4	cortex4
  10.10.1.5	cortex5

• TODO: disable wifi (wlan0 and wmaster000 interfaces), for security and power consumption reasons

Additional packages

• install some required packages:

  sudo apt-get install libncurses5-dev libace-dev cmake libgsl0-dev libgtk2.0-dev libgtkmm-2.4-dev libglademm-2.4-dev cvs g++ subversion ssh

Additional RobotCub software

OpenCV

Ubuntu prepackaged version 1.0.0-4:

  sudo apt-get install libcv1 libcvaux1 libcvaux-dev libcv-dev libhighgui1 libhighgui-dev opencv-doc python-opencv 

YARP

TODO

iCub software

TODO

More VisLab-specific configuration

TODO

Customization of GNOME panel

We used the same buttons that we put on Chico2. We copied the files by typing this on Chico2:

  scp ~/Pictures/* chico3:/home/icub/Pictures

and then manually adding the buttons one by one on the top toolbar of chico3.