ICub instructions

From ISRWiki
Revision as of 13:28, 2 September 2009 by Giovanni Saponaro (talk | contribs) (initial version)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Setup

The demo inventory consists of:

machine notes IP address, username
Chico the robot (duh) has a pc104 CPU in its head 10.10.1.50, icub
icubsrv Dell XPS laptop don't worry about this machine, just keep it switched on. It contains a hard disk that gets mounted by Chico's read-only CPU at boot time 10.10.1.51, icub
chico3 Tsunami 17" laptop we will use this machine for YARP and all demo management 10.10.1.53, icub

Below Chico's table, from top to bottom we have:

what notes IP address, username
iCubBrain chassis contains two servers used for computation 10.10.1.41 (icubbrain1), 10.10.1.42 (icubbrain2), icub
Xantrex XFR 35-35 thin power supply unit, to power pc104 and some motors -
Xantrex XFR 60-46 thick power supply unit, to power most motors -
APC UPS uninterruptible power supply -