RAPOSA-NG
Introduction
IdMind designed a new version of RAPOSA for commercial purposes, named RAPOSA NG (Next Generation). ISR has acquired a unit of this new version without most sensors for project and investigation purposes, aiming for depth notion, user-friendly visual control, 3D mapping, localization and augmented reality.
Specifications
Dimensions
- Length: 84 cm;
- Width: 47cm;
- Height: 18cm;
- Wheel radius: 9.5cm;
- Weight: 17kg (without extra hardware equipped).
Power
RAPOSA-NG uses 4S2P Li-Po batteries with 4800mAh and 14.8V.
Components
Internal Devices
From origin:
- 2 Maxon 150W DC motors (for differential drive);
- Firgelli Automation DC motor (to tilt the front body);
- 2 electronic boards:
- Motors board (for encoding);
- Relay board (to manage and redirect power supplies);
Installed:
- Commell LV-679: A Mini-ITX Motherboard with:
- Intel Core 2 Duo 1.6Ghz 4Mo 800Mhz Processor;
- 2x Kingston 1GB 667Mhz DDR2 RAM;
- Intel PRO/Wireless LAN 2100 3B Mini PCI adapter;
- Kingston SSDNow V Series 64GB.
External Devices
Sensors:
- Point Grey Bumblebee2 (Firewire stereo camera system);
- MicroStrain 3DM-GX2 (IMU with triaxial accelerometer, triaxial gyro, triaxial magnetometer, temperature sensors, and an on-board processor).
Batteries
- 8x 4S2P Li-Po batteries 4800mAh 14.8V.
Accessories (for usage)
- 2x Groupner ULTRAMAT (for Li-Po battery charging).
To be installed
- Microsoft© Kinect for XBOX 360 (Vision + Depth camera);
- A Pan & Tilt motor.