Install yarp and icub-* repositories at vizzy-desktop

Installation of visualization pc

At the computer you want to run gyarpmanager:

 Create the user vizzy

Create the file /home/vizzy/.bash_env with the following text

 export YARP_ROOT=/home/vizzy/repositories/yarp
 export YARP_DIR=$YARP_ROOT/build
 export YARP_ROBOT_NAME=vizzy
 export icub_firmware_shared_DIR=/home/vizzy/repositories/icub-firmware-shared/build
 export ICUB_ROOT=/home/vizzy/repositories/icub-main
 export ICUB_DIR=$ICUB_ROOT/build
 export YARP_DATA_DIRS=$YARP_DIR/share/yarp:$ICUB_DIR/share/iCub
 export YARP_COLORED_OUTPUT=1
 export YARP_FORWARD_LOG_ENABLE=1
 export PATH=$PATH:$ICUB_DIR/bin:$YARP_DIR/bin

Invoke the file at the /home/vizzy/.bashrc script

 source ~/.bash_env

Then open a new terminal and create the folder /home/vizzy/repositories

Install YARP from sources. At the folder /home/vizzy/repositories

 git clone https://github.com/robotology/yarp.git
 mkdir build
 cd build
 ccmake ../

Hit c, then e (if needed), and change the following flags (setting all of them to ON):

 CREATE_DEVICE_LIBRARY_MODULES
 CREATE_GUIS
 CREATE_LIB_MATH
 CREATE_OPTIONAL_CARRIERS
 ENABLE_YARPRUN_LOG
 YARP_COMPILE_BINDINGS

Hit c again and set the following flags to ON:

 CREATE_PYTHON
 ENABLE_yarpcar_bayer_carrier
 ENABLE_yarpcar_rossrv_carrier
 ENABLE_yarpcar_tcpros_carrier
 ENABLE_yarpcar_xmlrpc_carrier
 ENABLE_yarpmod_serial

Hit c twice in a row, then g and issue

 make -jX, where X is the number of cores

Install icub-main from sources. At the folder /home/vizzy/repositories

 git clone https://github.com/robotology/icub-main.git
 cd icub-main
 mkdir build
 cd build
 ccmake ../

Hit c, then e (if needed), and change the following flags (setting all of them to ON):

 ENABLE_icubmod_cartesiancontrollerclient
 ENABLE_icubmod_cartesiancontrollerserver
 ENABLE_icubmod_debugInterfaceClient
 ENABLE_icubmod_gazecontrollerclient

Hit c, then g and issue

 make -jX, where X is the number of cores