ICubBrain

In June 2009, we purchased "1U Twin" servers that are to be used as iCub Brain (hence the name). The box includes a SC808T-980 1U chassis and two twin X7DWT serverboards. Each of the two boards hosts an Intel Xeon 8-core processor (8 x E5405 @ 2.00 GHz). They are two independent computers, each one with its hard disk, power button, reset button.

For full system specifications, go here (PDF) or on the entry on tsunami.pt

Current setup

machine	location	operating system	notes
icubbrain1	left half of chassis	Ubuntu 8.04 LTS 64bit
icubbrain2	right half of chassis	Ubuntu 10.04 LTS 32bit	has IPOPT 3.9.0 (manual installation according to this page)

Operating system installation

The chassis contains two separate machines, each one having two hard disk drive drawers. Next, we will explain how we configured the left part of the server, called icubbrain1. The settings for icubbrain2 will be just about the same (unless otherwise noted, see above table), with the last octet of the IP address being 42 instead of 41.

Boot

We booted the Ubuntu Server CD from an external USB CD drive. Press the 'Del' key if you need to access the BIOS boot order.

We then had to manually confirm the usage of a 'cdrom' module within the installation (following all the default selections).

Network interface

icubbrain1 has two Gbit interfaces. First we plugged an Ethernet cable into the first one (which turns on the "1" led in the chassis front). Then, when Ubuntu asked us to choose between eth0 and eth1, we picked up eth0.

Partitions

We chose the 'Guided - use entire disk' option, which yielded the following:

Hard disk partitioning

size	mountpoint	filesystem
133GB	/	ext3
5GB		swap

Ubuntu installation parameters

• machine name: icubbrain1
• user name: icub
• software selection: OpenSSH

Operations after first boot

• choose Main server (rather than Portugal server, which is incomplete) as the software repository. We do this by removing all the "pt." strings from /etc/apt/sources.list
• sudo apt-get update; sudo apt-get upgrade

Other operations performed

Network configuration

• manually configured the internet connection (/etc/network/interfaces):

  auto lo
  iface lo inet loopback
  
  auto eth0
  iface eth0 inet static
  address 10.10.1.41
  netmask 255.255.255.0
  network 10.10.1.0
  broadcast 10.10.1.255
  gateway 10.10.1.254

• optionally, we can customize the /etc/hosts file like we did on Chico3; this would allow us to quickly access other machines, as in: ping cortex1. Alternatively, we can do nothing and just use ping cortex1.visnet (i.e., attach the .visnet part after a machine name, see VisLab network for details).

Additional packages and environment variables

• Install some required packages:

  sudo apt-get install gcc g++ make subversion ssh libace-dev libgsl0-dev libncurses5-dev gfortran

• YARP and iCub require CMake version >= 2.6. Therefore,
  • on Ubuntu 8.04 (icubbrain1), install CMake manually via http://www.cmake.org
  • on Ubuntu 10.04 (icubbrain2), just run sudo apt-get install cmake cmake-curses-gui

• Create a file called ~/.bash_env (used by both interactive and non-interactive sessions, such as commands launched via yarprun from another machine) like this one:

 export YARP_ROOT=/home/icub/yarp2
 export YARP_DIR=$YARP_ROOT/build
 export ICUB_ROOT=/home/icub/iCub
 export ICUB_DIR=$ICUB_ROOT/main/build
 export PATH=$PATH:$YARP_DIR/bin:$ICUB_DIR/bin  # icubbrain1 (older Ubuntu) also needs CMake bin path here
 export ICUB_ROBOTNAME=iCubLisboa01
 export IPOPT_DIR=/home/icub/Ipopt-3.9.0

• Then, before the following line of /etc/bash.bashrc

  [ -z "$PS1" ] && return

add this:

  # per-user environment variables (non-interactive and interactive mode)
  source $HOME/.bash_env

Subversion

We have set the following parameter in /etc/subversion/config:

 store-passwords = no

This implies that SVN will ask you for your password every time you do a commit. (Don't worry about changing your personal ~/.subversion/config file: the parameter is not actually set there, so the global /etc setting is used.)

Additional software

OpenCV

 sudo apt-get install libcv-dev libhighgui-dev libcvaux-dev

YARP and iCub

Follow the instructions on the RobotCub software article. For compilation, do not use sudo make install.

• Custom yarp2 configuration

 CMAKE_BUILD_TYPE Release
 CREATE_LIB_MATH

• Custom iCub configuration

 CMAKE_BUILD_TYPE Release
 ENABLE_icubmod_cartesiancontrollerclient ON
 ENABLE_icubmod_gazecontrollerclient ON

• iCub compilation

 make
 make install_applications

• Final configuration

  yarp namespace /icub

ARTOOLKITPLUS

Version 2.2.0 (Preferred) [From http://launchpadlibrarian.net/40255072/artoolkitplus-2.2.0.tar.bz2] Version 2.1.1 [From Main site: http://studierstube.icg.tu-graz.ac.at/handheld_ar/artoolkitplus.php]

MATLAB

MATLAB R2010a was installed on icubbrain1 (requires libxp6 package). Currently we are discussing if we want to leave the possibility to run MATLAB on the icubbrains (as well as on cortex), or to leave it only to cortex.