Vizzy Troubleshoot: Difference between revisions
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
yarpdev: ***ERROR*** driver <canmotioncontrol> was found but could not open | yarpdev: ***ERROR*** driver <canmotioncontrol> was found but could not open | ||
Try to run the "canLoader" and connect to all the boards with the "pcan" interface. | Try to run the "canLoader" and connect to all the boards with the "pcan" interface. | ||
* A board might not be connecting properly. | * A board might not be connecting properly. Try to reboot the boards and check the canLoader IDs. | ||
* An ID might be with the value 15 (which is wrong, the IDs go from 0 to 4). | * An ID might be with the value 15 (which is wrong, the IDs go from 0 to 4). | ||
Revision as of 14:57, 21 November 2011
iCubInterface/yarpdev
If the error is:
yarpdev: ***ERROR*** driver <canmotioncontrol> was found but could not open
Try to run the "canLoader" and connect to all the boards with the "pcan" interface.
- A board might not be connecting properly. Try to reboot the boards and check the canLoader IDs.
- An ID might be with the value 15 (which is wrong, the IDs go from 0 to 4).