Vizzy PC104: Difference between revisions

From ISRWiki
Jump to navigation Jump to search
(clean up obsolete Vizzy information)
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
==Debian Linux installation on the PC104==


Due to the constraints of PCAN bus module, the Debian version must be 4.0 (etch)
  Linux version 2.6.24-etchnhalf.1-686
The repositories of this version are not online anymore, so in order to install the system, you should:
*Download the netinstaller and the DVDs containing the packages,  http://www.debian.org/releases/etch/debian-installer/
*During installation, there will be a problem due to the unavailability of the packages. At this point continue the install procedure and when rebooting the system you will be able to add manually all the packages you need.
==PCAN bus driver==
===Installation===
The original installation procedure is on the robotCub wiki, http://eris.liralab.it/wiki/The_Linux_on_the_pc104 and http://eris.liralab.it/wiki/Compilation_on_the_pc104 . We follow the same procedure,
1) In addition to the iCub and YARP environment variables, and depending on the device you use you will also need:
  PLXCANAPI_DIR=/usr/local/src/robot/drivers/plxCanApi
It is recommended to add this variable to the /etc/bash.bashrc (as root)
    export PLXCANAPI_DIR=/usr/local/src/robot/drivers/plxCanApi
2) Uncompress the file http://eris.liralab.it/iCub/downloads/drivers/linux/pc104etchnhalf-bin-1.2.tgz in the folder /usr/local/src/robot/.
3) Compilation of the iCub repository, which it needs to enable the follwing flags:
ENABLE_icubmod_pcan
ENABLE_icubmod_canmotioncontrol
ENABLE_icubmod_dragonfly2
ENABLE_icubmod_logpolarclient
ENABLE_icubmod_logpolargrabber
ENABLE_icubmod_xsensmtx
ToDo: Check the source code provided by IIT in order to compile it against newer or other Linux versions.
===Start up script for PCAN bus driver===
Add the following lines to /etc/rc.local script:
  declare -x PLX_SDK_DIR=/usr/local/src/robot/drivers/plxCanApi
  bash -c "$PLX_SDK_DIR/Bin/Plx_load 9030"
The lines above allow the PLX module loading during the pc104 boot.
==Configuration files==
* iCubInterface config
/icub/app/iCubLisboa01/conf/vizzyInterfaceCartesian.ini
* Motor configuration: /icub/app/iCubLisboa01/conf/file_part.in
* Calibration C++ files: /icub/main/src/libraries/icubmod/
==Enviroment variables==
===For running the iCubInterface===
Add the following lines to /etc/bash.bashrc (as root)
    export ICUB_DIR=/iCub
    export ICUB_ROOT=/iCub
    export YARP_DIR=/yarp2/build
    export YARP_ROOT=/yarp2
We recommend to add the lines above before the following lines on /etc/bash.bashrc
    # If not running interactively, don't do anything
    [ -z "$PS1" ] && return
The proper placing of the environment variables will allow to access their values on a non-interactive login.
===For remote login===
For remote access such as ssh (putty on Windows), you should add the following line to /etc/profile (as root), right at the beginning:
    /source /etc/bash.bashrc
==Dragonfly2==
The dragonfly2 requires a libdc1394 library with version >= 2.0.0, which needs to be compiled for this debian version. In addition, we added the following line to the /etc/rc.local script:
    chmod a+rw /dev/raw1394
in order to allow all the users to access the firewire devices.
[[Vizzy|<< Back to Vizzy wiki homepage]]
[[Category:Robots]]
[[Category:Vislab]]

Latest revision as of 14:06, 22 July 2016